Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

色标传感器


Narrow down search result list

产品选型工具结果: 44 产品

外壳材料

最大传感器范围

光源类型

开关输出

连接类型

型号

工作电压

特殊

防护等级


Choose your product


Next PageLast Page
产品

Print mark contrast sensor with IO-Link interface, 11 mm detection range, RGB light parallel with the longitudinal direction of the housing, light/dark on, external Teach-In, 2 push-pull outputs, M12 plug, Diffuse mode sensor for recording any print mark, TEACH-IN, static and dynamic, 50 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue, Construction type(S2): Miniature housingfa

色标对比度传感器,9.5 mm 检测范围,RGB 光(红光、绿光、蓝光),亮时/暗时接通,外部示教,推挽式输出,M12 插头, 满反射传感器用于检测打印的标签, 静态示教:自动开关阈值适应, 光学系统可转角90°, 响应时间30ms,适用于高速扫描过程, 发射器三种颜色:绿,红,蓝, 结构类型: 矩形, 外壳: PC(Makrolon,玻璃纤维加固), 光源类型: 可见绿光/红光/蓝光,调制光, 工作电压: 10 ... 30 V DC, 信号输出: 推挽输出,短路保护,反极性保护, 连接: 5 针 M12 x 1 连接器, 传感器范围: 9,5 mm ± 3 mm, 防护等级: IP67fa

色标对比度传感器,9.5 mm 检测范围,RGB 光(红光、绿光、蓝光),带矩形光斑,亮时/暗时接通,外部示教,推挽式输出,M12 插头, 满反射传感器用于检测打印的标签, 静态示教:自动开关阈值适应, 光学系统可转角90°, 响应时间30ms,适用于高速扫描过程, 发射器三种颜色:绿,红,蓝, 结构类型: 矩形, 外壳: PC(Makrolon,玻璃纤维加固), 光源类型: 可见绿光/红光/蓝光,调制光, 工作电压: 10 ... 30 V DC, 信号输出: 推挽输出,短路保护,反极性保护, 连接: 5 针 M12 x 1 连接器, 传感器范围: 9,5 mm ± 3 mm, 防护等级: IP67fa

色标对比度传感器,9.5 mm 检测范围,RGB 光(红光、绿光、蓝光),带圆形光斑,亮时/暗时接通,外部示教,推挽式输出,M12 插头, 满反射传感器用于检测打印的标签, 静态示教:自动开关阈值适应, 光学系统可转角90°, 响应时间30ms,适用于高速扫描过程, 发射器三种颜色:绿,红,蓝, 结构类型: 矩形, 外壳: PC(Makrolon,玻璃纤维加固), 光源类型: 可见绿光/红光/蓝光,调制光, 工作电压: 10 ... 30 V DC, 信号输出: 推挽输出,短路保护,反极性保护, 连接: 5 针 M12 x 1 连接器, 传感器范围: 9,5 mm ± 3 mm, 防护等级: IP67fa
Print mark contrast sensor, 800 mm detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, NPN output, PNP output, M12 plug, Laser print mark contrast sensor for recording very small print marks, Laser class 2, eyesafe, Adjustable sensitivity, 30 µs response time, suitable for extremely rapid scanning processes, Construction type(S2): Rectangular type, Housing: PC (glass-fiber-reinforced Makrolon), Light type: modulated visible red lightfa
Print mark contrast sensor, 300 mm detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, push-pull output, emitter switch-off, M12 plug, Laser print mark contrast sensor for recording very small print marks, Large focus depth range from 3 mm ... 300 mm, Laser class 2, eyesafe, Adjustable sensitivity, 30 µs response time, suitable for extremely rapid scanning processes, Construction type(S2): Rectangular typefa
Print mark contrast sensor with IO-Link interface, 11 mm detection range, RGB light parallel with the longitudinal direction of the housing, light/dark on, 2 push-pull outputs, M12 plug, IO-link interface for service and process data, Diffuse mode sensor for recording any print mark, TEACH-IN, static and dynamic, 40 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue, Construction type(S2): Miniature housingfa
Print mark contrast sensor with IO-Link interface, 11 mm detection range, RGB light perpendicular to the longitudinal direction of the housing, light/dark on, 2 push-pull outputs, M12 plug, IO-link interface for service and process data, Diffuse mode sensor for recording any print mark, TEACH-IN, static and dynamic, 40 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue, Construction type(S2): Miniature housingfa
Print mark contrast sensor with IO-Link interface, 11 mm detection range, RGB light perpendicular to the longitudinal direction of the housing, light/dark on, external Teach-In, 2 push-pull outputs, M12 plug, Diffuse mode sensor for recording any print mark, TEACH-IN, static and dynamic, 50 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue, Construction type(S2): Miniature housingfa
带塑料透镜的色标对比度传感器,9.5 mm 检测范围,RGB 光(红光、绿光、蓝光),亮时/暗时接通,外部示教,NPN 输出,PNP 输出,M12 插头, 满反射传感器用于检测打印的标签, 静态示教:自动开关阈值适应, 响应时间30ms,适用于高速扫描过程, 发射器三种颜色:绿,红,蓝, 结构类型: 矩形, 外壳: PC(Makrolon,玻璃纤维加固), 光源类型: 可见绿光/红光/蓝光,调制光, 工作电压: 10 ... 30 V DC, 信号输出: 1 路 PNP 和 1 路 NPN,短路保护,集电极开路,同步开关, 连接: 5 针 M12 x 1 连接器, 传感器范围: 9,5 mm ± 3 mm, 防护等级: IP67fa
Next PageLast Page